lady jane Posted July 4, 2010 Report Share Posted July 4, 2010 i would like to fit an internal transducer on the boat so any advice or photos would be a great help. i have a sump for the pump that is single skin so i think this is where it needs fittng. thanks, andy Quote Link to comment Share on other sites More sharing options...
Mike Fox Posted July 4, 2010 Report Share Posted July 4, 2010 I did a temporary installation of a twin-frequency transducer using a block of moulded plasticine 3 years ago, and haven't bothered to make this permanent yet. Permanent installations involve either glassing/epoxying them in, or using an oil bath for full immersion contact. I haven't had the urge to try either. Avoid silicon sealant etc, as it's so soft it absorbs the vibrations, allegedly, and you get a very poor echo. Mike Quote Link to comment Share on other sites More sharing options...
Sinbad Posted July 4, 2010 Report Share Posted July 4, 2010 Andy, Im sure Bob or Adam will post - they have one on JV Paul Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.