jerry.shutter Posted July 18, 2017 Report Posted July 18, 2017 Other than heading to Golden Arrow does anyone know where I might find a control box to change a 25hp Yamaha tiller steer to steering wheel and throttle? Any good local mechanics who might help out if it proves testing to fix (hope not but mechanics not my strong point) Quote
Coddy Posted July 19, 2017 Report Posted July 19, 2017 Jerry A lot depends on the age of the engine as you may well need fixings and clip arrangements for the gear change and throttle cables, you will also possibly need to change the transom bracket so that the steering cable can be fixed to the transom, plus the quadrant to attach the steering arm. All in all it could prove quite costly all round, may be worth looking for an outboard already set up for remote steering Good luck Dave jerry.shutter and Hooky 2 Quote
jerry.shutter Posted July 19, 2017 Author Report Posted July 19, 2017 Sugar!!! might be throttle by hand then Quote
Coddy Posted July 19, 2017 Report Posted July 19, 2017 Have a word with your marine engineer as your outboard my be better equipped than I am suggesting. A phone call is a cheap quote Dave Quote
2006holmwood Posted July 19, 2017 Report Posted July 19, 2017 Had one done on a Honda a few years ago , I seem to remember it was not cheap. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.