bliss2 Posted March 12, 2006 Report Share Posted March 12, 2006 Just brought a new C-Map card for my RL80 but i can only range into 1.5 mile before i lose all the chart picture is this right because i my C120 witch uses a different card i can range right down to 1/8 of a mile not loseing any picture ? Quote Link to comment Share on other sites More sharing options...
Coddy Posted March 12, 2006 Report Share Posted March 12, 2006 Hi I use C-Map NT+ in the Navman and have no problem in going down to 0.05 nm (chart dependant) down to 0.01nm in plotter mode. I use the PC Planner NT+ in which you use your map card and it brings up the area of where you want to see in some detail down to 0.9 miles. Coddy Quote Link to comment Share on other sites More sharing options...
Bob F Posted March 12, 2006 Report Share Posted March 12, 2006 Hi Matt I'd suggest this is incorrect. You should not loose the map detail even if 1.5miles was your lowest range. Take it back. BF Quote Link to comment Share on other sites More sharing options...
shytalk Posted March 12, 2006 Report Share Posted March 12, 2006 could also be a setup problem with the plotter Quote Link to comment Share on other sites More sharing options...
bliss2 Posted March 13, 2006 Author Report Share Posted March 13, 2006 All sorted now i had to turn the plotter mode off in the main menu thanks Quote Link to comment Share on other sites More sharing options...
blueboatdriver Posted March 13, 2006 Report Share Posted March 13, 2006 Might have guessed it was driver error Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.