john c Posted June 16, 2006 Report Share Posted June 16, 2006 Hi, My neighbor has just taken up boating and was serviceing his newly acquired Mariner 15hp 2 stroke. It has lasted probably 15 years until last night when adjusting the carburetta float bowl with a large screwdriver and hammer (He's a Farmer). The brackets that hold the float mechanism have sheared and totally written off the casting. Does anyone know where I can get him a replacement carb. The engine has no numbers on it but is quite old. TK carburreta co written on casting. Any help would be most appreciated. Regards John C Quote Link to comment Share on other sites More sharing options...
Afishionado Posted June 16, 2006 Report Share Posted June 16, 2006 First off you MUST get the engine number as no dealer will be able to help without that. You could try Bucklers Hard Marine near Lymington Hants, they are very helpful Yamaha dealers and I think the Mariner of that age is Yammy based. Other than that try a Google search for both Mariner and Outboard spare parts. Oh and Ebay is worth a look under Outboards - Mariner. Mad Mike Quote Link to comment Share on other sites More sharing options...
Pugwash Posted June 16, 2006 Report Share Posted June 16, 2006 R.I.B.S Marine in Christchurch are Mariner agents. If you get the engine along to them they may be able to help. I've always found them to be very good. Steve Quote Link to comment Share on other sites More sharing options...
john c Posted June 19, 2006 Author Report Share Posted June 19, 2006 Thanks for your advice chaps. I can't see an engine number anywhere on this one. Guess I'll have to take it along for an ID. Regards John C Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.