Coddy Posted April 14, 2004 Report Share Posted April 14, 2004 Hi all I tried to take the brake drums off my Roller Coaster 3 trailer without success It has these 'bearing super savers' with long tubes out of the hubs. To gain access to the split pin you have to remove the tubes but HOW? Do they unscrew or tap out, tried both (gently) without success! Anyone out there who has done it? Thanks Codfather Quote Link to comment Share on other sites More sharing options...
Paul D Posted April 14, 2004 Report Share Posted April 14, 2004 I tapped mine off using a small hammer. It sounds like they are the same. Once you get them off, don't forget to replace the bearing races as well ( I did ! ). Quote Link to comment Share on other sites More sharing options...
oysterboats Posted April 18, 2004 Report Share Posted April 18, 2004 i had bearing savers on my rollercoaster 7 and if i remember crrectly you just tap around them and they come out. if not im sure bournemouth trailer centre at ferndown could advise you Quote Link to comment Share on other sites More sharing options...
Bob F Posted April 25, 2004 Report Share Posted April 25, 2004 Yep, they just tap out. Use a piece of wood to protect the metal and then tap it with a hammer at 9'oclock and 3 o'clock and it will slowly ease out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.