pc planner

[gjb]

I have just got a pc planner for c-map

for navman 8084 plotter can't get it to show any waypoints that i have stored any one know how to do this and can give me some advice on how it is done

 

cheers

graham

[Coddy]

Hi Graham

 

I also have one of the planners but you do need a blank SD card. If I remember correctly the Navman needs a 2mb User card.

Once you have got the card you need to format the card before saving the waypoints/marks from the plotter.

Once this is done you can download the waypoints/marks from the plotter to the User Card.

You then insert the C-Map card and the user card into the planner reader and it should show the detailed chart and the waypoints.

If you look on the planner menu you will see you can save all the marks/waypoints to the PC.

You then have a back up plus you can look up various likely looking marks and add them to your user card.

Note that the symbols use to change when I did the transfer from PC to plotter, I don't know why and it could have been me getting it wrong!

 

Hope the above helps

 

Dave

Edited November 15, 2009 by Coddy

[gjb]

Thankyou Dave this planner only takes one of each card so i think you down load on to the hard drive but i think i will have to get some computer whizz to show me how

 

thanks

graham