Coddy Posted February 16, 2006 Report Posted February 16, 2006 Hi all Just a quick recommendation for Prop Revolutions in Cobbs Quay, just picked up my prop after hitting Christchurch bar. It needed straightening, re-profiling and balancing. Came back looking new including a new paint job 10% discount for being a club member Total cost including VAT Quote
TomBettle Posted February 16, 2006 Report Posted February 16, 2006 Anyone know the torque setting for a Mariner/Mercury 60hp prop nut? Coddy Not very tight! Quote
Afishionado Posted February 16, 2006 Report Posted February 16, 2006 Anyone know the torque setting for a Mariner/Mercury 60hp prop nut? Coddy Not very tight! If you have not found the manufacturers setting then try this general rule. Up tight but don't go mad, then back off half a turn. Mad Mike Quote
plaicemat Posted February 16, 2006 Report Posted February 16, 2006 Dave, according to my Mariner Maintenance Manual, the prop nut should be torqued to 55 lb.ft (75 N-m). Hope this helps. Terry B. Quote
Coddy Posted February 17, 2006 Author Report Posted February 17, 2006 Thanks all, ddn't want to loose my repaired prop Coddy Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.