Sand Wheels

[reg]

I must oplojise for not getting back sooner But I'v had a accedent at work .and am now back on my feet. Sand wheel If you can get hold of an old Indispension unit grind out the old axle. Then you need to make a plate up a bit bigger than your draw bar. drill a hole in the plate the same size as your axle and weld it in. then it is a matter of a plate for the other side of the draw bar then putting two ubolts through. or make a u shaped bracket and put one bolt through.Hopes this makes sense as I can't lay my hands on the lead for the camera to get some picture's on

 

Reg