conger king Posted May 21, 2008 Report Posted May 21, 2008 does any one know some one to fit windless to a rodman 700 recomended please Quote
gjb Posted May 21, 2008 Report Posted May 21, 2008 Richard at HOLES BAY MARINE is very good and helpful graham Quote
Gas Posted May 22, 2008 Report Posted May 22, 2008 Richard at HOLES BAY MARINE is very good and helpful he looks after Abode11 got a lot of time for him and his crew. Craig Quote
Wedger Posted May 22, 2008 Report Posted May 22, 2008 Tell him it's a wind'lass' though..................... He likes the 'Lasses more than the lessez......................... ........................ Sorry....................... Quote
duncan Posted May 23, 2008 Report Posted May 23, 2008 whilst I am also happy to recommend Richard (he looks after Phaeton from time to time) there are elements of fitting a windlass to a small boat that benefit from a 'personal' approach. when I removed mine (installed by a professional through the distributor - not Richard!) after 1 year I found that none of the cuts or holes had been sealed and, given they were through gel to glass to ply etc it was no surprise that the ply had soaked up water etc if I had been installing it I would have overdrilled, filled and redrilled the holes as well as sealing all the exposed cuts etc in a way I don't blame them as time is money etc so it's just one of those ju=obs where a fe minuted here and there rather than a straight hour (the cut and drill bit at the front) makes sense. Quote
conger king Posted May 24, 2008 Author Report Posted May 24, 2008 duncan can you tell me why you took your windless off thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.