Jump to content

steaming


conger king
 Share

Recommended Posts

It's probably insufficient water being injected into the exhaust to cool it enough.

Check your raw water flow, possible causes of reduced flow are:

1. Blocked raw water strainer.

2. Damaged impeller.

3. Blockage in the heat exchanger.

4. Blockage in the oil cooler.

 

 

If raw water cooled, ignore step 3.

Edited by Brian
Link to comment
Share on other sites

Just a thought, the water inlet on the exhaust elbow can get restricted by the salt water, could be that it is not passing enough water into the exhaust system to keep it cool.

 

I can keep my hand on the exhaust pipe without it getting burnt, it should not exceed 90 degrees C. Most high exhaust temp warnings are set for this maximum limit.

 

Coddy

cool.gif

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...