3 leg Puller

[Coddy]

Hi all

 

Has anyone a 3-leg pulley I can borrow as I need to remove the flywheel from my outboard. It is a Yamaha 40HP twin carb, old but works a treat.

It would need to be fairly large to get the legs under the flywheel.

 

I need to see where there is a break in the lighting coil as it is not charging and no output from the coil. :-(

 

Many thanks

 

Dave

[Jim]

I'll go and Look Dave.

[Jim]

I have a selection Dave.

Come and get them.

 

 

Jim

 

 

[diverdave]

Hi all

 

Has anyone a 3-leg pulley I can borrow as I need to remove the flywheel from my outboard. It is a Yamaha 40HP twin carb, old but works a treat.

It would need to be fairly large to get the legs under the flywheel.

 

I need to see where there is a break in the lighting coil as it is not charging and no output from the coil. :-(

 

Many thanks

 

Dave

That will be a big puller !

 

Has it got 3 or 4, 6 or 8mm tapped holes in the top face ?

 

If so they are for removing flywheel.

 

Plate with matching holes and bolts and centre bolt.

 

Tighten it all up and whack centre bolt with hammer.

[diverdave]

If you get stuck let me know.

I've got a mini flywheel puller that I adapted to fit my 50hp Evinude

using the holes in the flywheel.

[Coddy]

Cheers all for the info

 

I thought I had an old mini flywheel pulley somewhere but need to have a deeper look.

Looking to borrow Jims puller if needed.

 

Dave, not sure size of bolts but look about 6 or 8mm with 3 holes

 

Will advise how I get on

 

Dave