Sinbad Posted November 23, 2008 Report Posted November 23, 2008 One of my switch lamps has stopped working. Normally, on these type of switches, when the lamp goes out - the fuse has blown - but this switch works fine but no lamp. Ive found one supplier of a replacement switch - index marine equipment - but the postage and packing (joke) would make the total over Quote
great white Posted November 24, 2008 Report Posted November 24, 2008 Hi Paul Index Marine are in Poole so I am not sure why P&P is high. I expect the switches are sealed, but if they are not I am sure Maplins would be a good starter for looking at the lamp. Charlie Quote
Jim Posted November 24, 2008 Report Posted November 24, 2008 Do you just need one switch or the whole bank ? It looks the same as my Warrior switches. When I bought Small Fry, there was an electrical fault. I traced it back to corrosion one one of the switches. I bought a set from Cobb's Quay chandlers which I fitted with sealant. I had to remove them and broke the panel. I then bought a new panel, ready fitted with battery lead for less than Quote
Sinbad Posted November 24, 2008 Author Report Posted November 24, 2008 Hi Jim Many Thanks - These are sometimes the 'sea dog' panel type switches- slightly rounded shape on the switch surround. If you are going to the next club meeting - could you bring one along ? - I only need one switch. If its not a match then I'll go the new route.. its not super urgent, just a pain to fix.. One of the winter projects.... Regards Paul Quote
Jim Posted November 24, 2008 Report Posted November 24, 2008 Paul, Do you ever get anywhere near Hamworthy ? If you do, let me know and you can have it sooner. I'll PM my No. Jim Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.