Coddy Posted February 2, 2009 Report Share Posted February 2, 2009 Hi all The single lever morse control slowly creeps back so slows the engine, is there a friction nut/screw I can adjust to stop this? I have never taken one of these apart so any help with diagrams or pictures would be great. In fact where do you start to take apart? Thanks in advance Coddy Quote Link to comment Share on other sites More sharing options...
Adam F Posted February 2, 2009 Report Share Posted February 2, 2009 There should be Dave, although it depends on the make / model of control. Ours does have. Access - there should be a friction fit blanking cover tha pops off revealing the screws to the unit, however - again there are dozens of different type. Can you post a photo? Quote Link to comment Share on other sites More sharing options...
Brian Posted February 2, 2009 Report Share Posted February 2, 2009 Dave Is it a MT-3, if so I've got the Owners Manual (12 pages, can copy it for you). Quote Link to comment Share on other sites More sharing options...
Brian Posted February 2, 2009 Report Share Posted February 2, 2009 Dave Does it look like this? Quote Link to comment Share on other sites More sharing options...
Brian Posted February 2, 2009 Report Share Posted February 2, 2009 Dave Assuming it's an MT-3, I've sent you an Email with the manual attached as a pdf. Quote Link to comment Share on other sites More sharing options...
Coddy Posted February 2, 2009 Author Report Share Posted February 2, 2009 Hi Brian Yes it does look like that, I will take a photo when I can get on the boat. Up North at the moment, (Yorkshire), so I hope to be able to get back for the meeting on Thursday. Thanks again, owe you another pint! Dave Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.