Adam F Posted July 27, 2004 Report Posted July 27, 2004 Who posted and can anyone remember the link for the company that supplied S/S fittings of various types? I think it was when jimbob was after a radar arch...??? Anyone? Quote
Newboy Posted July 27, 2004 Report Posted July 27, 2004 Do you mean this one? http://www.marine-hardware.co.uk/ Look under Deck & Hull Fittings in the on-line catalogue. However, I'm having a 1.6x0.8x0.2m 'roof rack' custom made by a local firm, using 25mm tube and with 6 rod holders all for Quote
Adam F Posted August 2, 2004 Author Report Posted August 2, 2004 Can you send me the details of the company who are doing it? Basically I need a shallow U S/S piece made up, similar to a handrail, about 600mm long, with a tube clamp on each end to enable it to be clamped to my radar arch....on this I will then mount 2 x spot lights for coming back in at night. Quote
Newboy Posted August 2, 2004 Report Posted August 2, 2004 The company is called Andover Tune Engineering and their phone number is 01264 363644. It's only small engineering firm. They make mainly s/s hand rails etc. Get a draeing and fax them for a quote. I faxed a few company in Soton and their quote were a lot higher than this one's. It also helps if you are slightly flexible on sizes, if they can use off cut it'll cost less. On my rack, the 6 rod holders was originally dia 45mm, but they have some dia 65mm off cuts and they cost a few bobs rather than order a whole new piece in. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.