LilBrit Posted March 28, 2015 Report Posted March 28, 2015 Looking for a pair of 24" pitch props for a Mercruiser Bravo 3 as I think my 22's are a little fine and let the engine over rev at WOT. Hope this doesn't infringe forum rules? Part No's are: 48-823665 & 48-823666 Cheers, Paul Quote
Maverick Martin Posted March 28, 2015 Report Posted March 28, 2015 Paul the heading you posted under is swap and shop so post/ask away Quote
LilBrit Posted March 29, 2015 Author Report Posted March 29, 2015 Thanks Martin!! Just got pipped to a tidy looking pair of props on evilbay I reckon the boat would be better for the change so hopefully someone might know the whereabouts of a pair. Quote
Wedger Posted March 29, 2015 Report Posted March 29, 2015 Can you not have then re=pitched by 'Prop Revolutions'?? by far the cheapest option. They can calculate the ideal pitch for you. Cracking service. Quote
Brian Posted March 29, 2015 Report Posted March 29, 2015 Propeller Solutions Ltd Address: Bridge St, Bailie Gate Industrial Estate, Sturminster Marshall, Dorset BH21 4DB Phone:01258 858784 Quote
Rob Posted March 29, 2015 Report Posted March 29, 2015 It used to be "prop revs" in Cobbs, are they the same Brian? Quote
Brian Posted March 29, 2015 Report Posted March 29, 2015 It used to be "prop revs" in Cobbs, are they the same Brian? Yes, They moved a few years ago. I thought they were the same, but I was wrong. Quote
Maverick Martin Posted March 29, 2015 Report Posted March 29, 2015 No they are definitely not the same although the man heading up propellor solutions is the same guy that ran propellor revolutions. His name is Tom and I think you will find he has moved away from repairing propellers to supply of new propellers and Propeller Deflectors http://propellersolutions.co.uk/ he is though still worth a call. Another company worth a go are http://www.darglow.co.uk/index.html Brian used to work with Tom Quote
LilBrit Posted March 30, 2015 Author Report Posted March 30, 2015 Thanks for the ideas guys, isn't it going to be too much to add 2" of pitch though?? I'll give them a ring and see what they reckon. Quote
Brian Posted March 30, 2015 Report Posted March 30, 2015 They can usually repitch by a maximum of 2" either way. Quote
LilBrit Posted March 30, 2015 Author Report Posted March 30, 2015 Phoned a few places today but nobody at home Not sure how easy it is to repitch Stainless as opposed to Aluminium props? Quote
Kingfisher 126 Posted March 30, 2015 Report Posted March 30, 2015 When repitching it just means they need a bigger hammer with stainless! Basics are they twist the blades. Jim 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.