Jump to content

Broken Eagle Fishfinder


mickburder
 Share

Recommended Posts

I have an Eagle FishMark 500c that will not turn on, checked the power to the unit all seems OK. Has been working fine until this weekend.

Can anyone recommend a service or repair centre, Navico said send it in and they will part-exchange it, but I would rather have someone look at it first, credit crunch tactics!

thanks

Mick

 

Link to comment
Share on other sites

when i bought small fry, the gps and radio would not fire up, a multimeter confirmed 12v supply was present.

it turned out to be corrosion on the switch contacts.

12 volts coming through but no umph !

try re routing a clean supply of power.

 

 

Jim

Link to comment
Share on other sites

MES at Poole could look at it

 

But it depends on the Part Ex costs, as these guys hourly rate is high, sick.gif

 

I would follow Jim's advice first if you can, contacts plugs are always a weak link. or hope that a Member with the knowledge would be able to help.

 

Good luck

Charlie biggrin.gif

Link to comment
Share on other sites

Hi Mick

 

As others have said I would check all wiring is 100% as the salt water enviroment is not good on any wiring on a boat.

Switch/Contact cleaner may help on the plugs and pins. Might also be worth having a paperclip to ensure that there is no green growth on the plug or pins. The clip will help to clean the plug contacts if you GENTLY push an end into the plug contact.

 

I think there was a repair agent in Wareham/Swanage area but I don't know if they look at Eagle/Lowrance units. Tom Bettle would know whom I mean if you PM him.

 

Hope you get it sorted

 

Dave

cool.gif

Edited by Coddy
Link to comment
Share on other sites

you can try typing in fishfinder repairs on ebay the company at wareham were advertising on there a little while ago. before you had to go through local dealers who sent your gear there any way .sorry i cant remember their name tho but its worth a try as they were giving trouble shooting advice aswell

Link to comment
Share on other sites

  • 2 weeks later...

As my old chartplotter is u/s, I decided to chase this up. I contacted the Service Centre on behalf of the club and received the copied email in response. Hope this helps other members.

Terry,

 

Thank you for your interest, yes we can indeed repair most manufacturers and in many cases carry out repairs directly for them and their distributors or dealers.

 

I have attached our company details and we would be happy to offer a discounted labour rate of

Edited by Maverick
Link to comment
Share on other sites

Deep joy! My previous Lowrance chartplotter, which was about 2 years old, ceased to function in as much as it wouldn't completely fire up so I replaced it with my current combined unit. Upon reading the above, I obtained some switch/contact cleaner, sprayed it in the appropriate holes and; bingo! Up and running as before.

Link to comment
Share on other sites

Same again!, plugged in the repaired fish finder yesterday, unit came on only to go off again immediately, that was a waste of 66 quid!

Not the fault of Service Centre I must now get the electrics checked out. The VHF and the chartplotter work OK, very odd.

To top it all off we have now got a lot of water coming into the hull on the boat through a crack in the hull where the rollers on the trailer sit.

I have put a new post on hoping someone knows a man who can fix it?

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...