Rob

Brilliant!!!

Good point Greg, I see what we have done there......

We await the tuna netters to arrive in Lyme Bay.

R

Sounds like we have given away rights to our waters again, not sure we wanted that from Brexit!!

R

Kodiak, Brothers Jones, Adam and myself.

R

Young master Gummage would like to talk to you

My Nelly is expecting pups early Junewl, ready for new homes early August.

Dame and Sire genetically clear for the usual Spaniel issues.

I know the Sire as work with him on a Dorset Shoot and we both train at Dorset Working Spaniel Club.

Both parents are on the quieter and relaxed side of spaniels and work very well in the field.

Pups will be Kennel Club registered, chipped, docked (not too short) etc....

If interested or know someone who might be, please let me know.

In the photo, Silas on left and my Nelly on the right.

Cheers

Rob

Sent from my SM-S721B using Tapatalk

Link here:

https://www.southern-ifca.gov.uk/live-consultations

Adam too Ruben and myself out on Saturday after we all spent the morning at a work party on our pheasant syndicate.

The late start meant a late finish. We were out on Southbourne rough (tried a couple of spots) but it was slow going. But plenty of pout!!

A move to Ballard yielded some keeper bream to keep us happy.

A late move as the sun was dipping for a bass led to me getting one on on a lure and Adam dropping one.

Cracking day out, thanks chaps.

R

Sent from my SM-S721B using Tapatalk

It was very fishable and we thought it might be a bit snotty, not at all! Even once the tide changed. Small tides I guess. So usual cruise speeds were maintained.

Most boats seemed to think the same, only a few yachts seen in the bay, no anglers at all.

R

I was asked to crew Kodiak back from the Hamble to her home at NHYC Poole, forecast looked 'ok', wind and swell behind us.
 
I chucked in a old rod with fixed spool to try for an early mackerel off the Shingles.......Adam didn't bother.
 
Well, whilst I feathered, Adam cleaned the cabin. I moved us off back towards Poole and the Xchurch Ledge, and no sooner had I said "keep an eye out for birds....." Than Adam spotted some......
 
We headed over, it was like a tuna bust-up. I would say we ended up with 1000+ gulls and a line of them that stretched 1/2 mile or more.
 
Started off on feathers....a decent bass followed them to the boat...
Found a reasonably heavy lure and got close, couple of hits on first cast, then fish hooked on second.
 
That is how we spent the next 60 minutes.....we caught loads, many just under size, but managed a few sizeable ones for the coolbox.
 
Yes, I let him borrow my boat rod to cast with! And I even caught a couple on a lure tied to a spool of line by hand.
 
Not bad for a non-fishing trip!
 
Lovely cruise back, on to mooring and a glass of wine in the sun by the clubhouse.

One of this year's upgrades was sonar with a thru-hull , which needed an extension to a step in the hull ..... It worked beautifully! There was always noise on the display at speed, where we believe air was below the shallow hull.
 
R
 

Hmmm, I downloaded the manual, doesn't look good.

I remember seeing something before on this forum , where there was a cut price unit that was a standalone unit so didn't have the connectivity of more standard units.


Annoying!

R

Any modern plotter should have a nmea 0183 output (that's from memory so might not be quite correct).

Maybe you need to set the plotter to broadcast this data ?

R

Vessel Finder app will show you who is where......if, they have an AIS beacon.

Smaller boats tend to have beacons, if you have a receiver too, often your plotter will overlay the data of boats on your chart.

You can tap the vessel and get speed and direction.

R

Running AIS on mobile or tablet would be good in these situations if you don't have receiver / transponder.

R

Top day, well done skipper!

So shiny you can see yourself in her! (I spent a few hours helping out on Kodiak, no, I'm not offering to do anymore!):

Bugger

Has anybody got an old boat seat, folding type?

Will pay or swap for venison, as it's for my highseat....

Photo of the type of thing I'm thinking.

Cheers,

Rob

Adam and I are down on Kodiak for a second visit for the upgrades and tweaks....we feel it calling too!!!

R

Lovely, some more great times to come

It's a sh1t job but someone has to do it!

Sold pending collection

Anyone interested in a roe doe, £40 in of out of coat? Head shot, so pristine condition!

Can deliver around Bmth/Poole.

Rob

We agreed 50lb as there were so many 40lb ones..........I guess there has been a reset along the way at some point.


R

I'd head south of the needles!!!