Jamie W Posted July 25, 2014 Report Posted July 25, 2014 Just to add to my on going woes. The boat shaft is warpped. Is out to much to go back in the water. Its roughly 6 feet long. Any one know any localish services? Cheers Quote
gjb Posted July 25, 2014 Report Posted July 25, 2014 Richard at Holes Bay marine would get it done i would think graham Quote
Jamie W Posted July 25, 2014 Author Report Posted July 25, 2014 They don't mate :-( . Tried lake engineering. They dont either. Jamie Quote
Jim Posted July 25, 2014 Report Posted July 25, 2014 Speak to Tim at Rovic Engineering. Allens Lane Poole. I know they have plenty of gear & know how. He's a Rag & Stick man but they're still boats. Give him a call. Jim Quote
Jamie W Posted July 25, 2014 Author Report Posted July 25, 2014 Looks promising.. Will give them a call. Thanks Jim Quote
Adam F Posted July 25, 2014 Report Posted July 25, 2014 Nightmare. You've not had much luck have you. Hope you get it sorted mate. Quote
Jim Posted July 25, 2014 Report Posted July 25, 2014 Just sent Tim an email so he'll know who you are when you phone. Jim Maverick Martin 1 Quote
Jamie W Posted July 26, 2014 Author Report Posted July 26, 2014 Thanks jim. Yep, 7-8 months of no luck :-( Still have my doubts about the engine now. After all this. I reckon it will play up still. Some mechanics just cant be trusted ive learnt., Quote
Brian Posted July 29, 2014 Report Posted July 29, 2014 Hi Jamie. I see you're back in the water, what happened about your prop shaft? Quote
Jamie W Posted July 29, 2014 Author Report Posted July 29, 2014 Took it to First Marine Propolsion http://www.1stmarine.com Couldnt rate them higher. Got it straightened almost perfect. Coupling face was out, they re-faced that. All checked with a DTI All for £40.. Gave them a tip ofcourse. No osalation anymore. Tried rovic, engineer was on holiday who could of done it.very Helpfull though. Quote
Jim Posted July 29, 2014 Report Posted July 29, 2014 Took it to First Marine Propolsion http://www.1stmarine.com Couldnt rate them higher. Got it straightened almost perfect. Coupling face was out, they re-faced that. All checked with a DTI All for £40.. Gave them a tip ofcourse. No osalation anymore. Tried rovic, engineer was on holiday who could of done it.very Helpfull though. Tim at Rovic must be OK - - - - He gave me the job I've got now ! He left soon after that though Was it something I said ?. Nah he's a good lad. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.