Jump to content

Maverick Martin

Administrators
  • Posts

    11,834
  • Joined

  • Last visited

  • Days Won

    347

Everything posted by Maverick Martin

  1. Each inch of pitch equates to approximately 200 rpm
  2. Most multi roller trailers have a swing beam set of rollers to the rear. If I can make some spare time tomorrow I will take some pictures and post them here Martin
  3. Duncan How much are suitable trailers new I ask as I have seen a trailer at our local force four chandlery shop today (Bournemouth Road, Lower Parkstone) and they wanted 895. It is a single axle suitable for boats up to 6 metres. Iits adjustable and so would do the job. I'm not sure if it was braked or not. It looked new but I dont know for sure if it is or not. If its of interest let me know and I'll make some enquiries, take photos and post em etc, unless your local to Poole of course then you could see it yourself Martin
  4. Glad your back MH missed your regular reports Martin
  5. Unfortunately I dont Rich but I would guess around two/three years ago
  6. Adam With modern engineering tolerances engines should spin freely when they are first fired up and should be performing near their optimum almost straight away. I would reiterate that your engine should be able to run at or near the recommended max revs. if your engine doesn't and you are over-proped you could put excessive strain on your motor causing long term problems with worn out components. The symptoms of over-proping are slow onto the plane, not being able to reach the full rpm, not reaching the max top speed and possibly higher fuel consumption. Your engine also will not develop its full hp until the optimum revs can be achieved. When I got my new engine it did not get to the full revs with the prop supplied. Bearing in mind my engine is a 150hp and after owning boats with 50hp engines it still seemed fast to me. The engine was only achieving around 4800rpm when the book stated it should run at 5600rpm give or take 200 rpm. After going to Warrior and achieving nothing I went to propeller revolutions and Tom there stated that the prop was my problem have one of these, and so I did. Wow chalk and cheese is all I can say to explain the difference. I kept my old prop as a spare and earlier this year I put it on and gave it a go, sure enough slow hole shots and only achieving 4800 rpm Maverick was like a slug. I soon changed back again. If your worried have a word with Tony at select and put your mind at rest or failing that go and see Tom, give him the boats spec, he will calculate the correct size and pitch of prop for you. Fun this boat owning lark isn't it Martin
  7. Good work Paul I remember the boats when they were made by Millenium Marine. If I remember correctly they had a good write up in Sea Angler. Does anyone keep there old issues of Sea Angler, would be interesting to see the test report. Martin
  8. Adam Did you trim your engine out? if you did it sounds to me as though you might be over proped. Take a look at your hand book and it will give you the rpm that your motor should run at flat out. You need to get as close to this as you can for optimum performance and economy. If you cant get near this then have a word with Tony, he should be able to exchange the prop for you. Martin
  9. Rich I will have 2 spools of 30lb if you have some spare Swap money for goods at next meeting? Cheers Martin
  10. Newboy My Warrior came with a three year warranty, that was five years ago and may have changed since then. Martin
  11. I would agree with Mike on all counts. My Warrior has a tendency to porpoise at around 30 knots (not that the weather lets you do this speed very often) but a quick touch of the trim tabs soon fixes it Martin
  12. Porpoising is a term used to describe the bow of a boat continually lifting up and down, a bit like nodding your head. It will probably only happen when the boat reaches a certain speed, usually near the top end for the boat (but not always) When deciding about any purchase you have to ignore detrimental comments made by salesmen about competitors products, its in there interest to sow the seed of doubt. You have to look at the products and judge them on there merits. Test drive all of them if you have to but definately have a good test drive of the boat you intend to purchase, you wouldnt buy a car after driving it around the car park so why a boat. Try and find other owners of the same craft and ask their honest opinion, new owners are not as reliable (still in love) as owners who have had there boat a year or two so look for older boats for judgement. Re delivery dates in my experience they are not usualy reliable. I purchased my boat, was given a delivery date that was put back once and on the day of collection was still being fitted out, but I did get it in the end Martin
  13. Adam Parting with the spondoulies is hard but I'm sure you'll find it was worth it in the end Martin
  14. Welcome back Rich, we wuz a little worried about you mate Martin
  15. Welcome to pbsbac.co.uk Crab Feeder aka Marc. You finally found the best small boat angling forum/club Martin
  16. I also have one of those tubes on my Mariner Optimax, when new I asked Tony from Select Marine what it was and I think he said something about speedo but not 100% on that. Needless to say it aint important Martin
  17. Pete we will find you a space. If there are no spaces on other boats you can squeeze on Maverick Martin
  18. Andy at Poole Sea Angling has said in the past that he will match advertised mail order prices and I would assume that other local tackle dealers would also try to match mail order prices. Martin
  19. Sounds about right to me Cheers Paul Martin
  20. Beam is the measurement across the width of your boat and draft is the amount of water she will float in Martin
  21. Hi Dave talking of house moves any luck on the search front?
  22. Hi Paul I think that free email addresses should be a perk of being a member of the club but not necessarily available to all members of the forum. If club members wanted to take advantage of cheap web hosting then imo this should be available to them at a nominal annual charge to help offset the cost to the club of keeping the site. We have to remember that all club members some of whom do not have access to the Internet pay though their subs (approximately
  23. No problem Alan we will see you alright for some marks Martin
  24. I'll start building a pier at the bottom of my garden to moor Maverick on
  25. I agree Adam especially as Andy at Poole Sea Angling Centre is one of our more generous sponsors Martin
×
×
  • Create New...