Rob

Luckily I have set my Firefox so I only see Blur Blur Blur Yah Yah Yah Nah Nah Nah when Tom posts.

Dave - welcome - anypics of the restoration to show us? A portland rig with lures etc needs a moving tide and the boat to be on the drift - otherwise you need to drop the portland and add your own movement in to the lures. Pop along tonight to the club meeting and pick a few brains!!! Rob

I think Charlie C is on to something - being connected to a etring of pots then lifted by the way is going to have a huge effect of the boat. In the pic of it boken on the beach the arm from the winch is missing and she has broken in two along that line. I suspect without the pots attached it would have been lifted and twisted an dumped back down and survived.

Another "Anchovy" in the clutches of a PBSBAC member (sorry for teh pun!)!!

Great Tom - you have now ruined 2 shows in one go for me. Not seen either yet - do I need to now!!??

Dave can you trade in that Bluechart for the latest one? To save spending out on the full rrp?

I have watched episode 1 and 5 - ep 1 expires today so watch it quick!! Blue and Porgie fishing out of Milford Haven. The Subtitles requirement is a little annoying but OK - I will record the rest of the series via Freesat - starting tomorrow evening - as I will be somewhere else, with you lot! Rob

Neal - had some pads that soak up fuel or water - can't remember - he might be able to help.

Alun, You forgot to describe the fighting characteristics? Long steaming runs or did it go deep?

Brian - sorry to tell you but my BS detector just lit up good and proper!

IT IS ON NOW!!!!!!!!

Saturday 4 th December 1/ Dave Samuel 2/ WEDGER trev 3/ Pirky.....Dave 4/ Bill Smith 5/ Rory Mac 6/ John Wilcox WOTU2UK 7/ Allan LEICESTER FISHEAGLE 8/Nigel 9/ Rob Francis

He wouldn't have if he had known!!!

"I didn't hang about too long" - and you said it wasn't even cold, bless!

Nigel - sounds like you're too tidy onboard - I have been out before without any weights, but found a dozen here and there! Tidied the console last weekend and found at least 10+ hooks of various sizes! Am i suspecting an emergency selection of hooks line and weights will be tucked somewhere soon? Well done for getting out and more for admitting it!!! Rob

Another one Trev! Blimey, will we be seeing signs for "Trev's Trailers" in the yellow pages?

Tony - you have had your plaice quota for the year already!!

It's happening - a few destructive fishermen may have to do something else - it that a shame? http://www.bournemouthecho.co.uk/archive/2...es_of_fishing_/

PM Trevor "Wedger" - He has had his bottom "done" recently!

No need to be mean Brian

Nice one Derek. "Rob's Rock" no one told me about that!! Rob

Cuddy, cabin, shelter - what's wrong with you all? A small folding cuddy is light, keeps off the wind and allows fishing access all round when down. Mind you - I do have a sore throat and sunday was cold! OK - maybe it is a good idea, that's why I have friends with boats with cabins - for winter time!!! Rob

Mike - not sure re squid but I did had some very energetic seaweed take my bait on Sunday to the East (aka cuttlefish). Looked like weed, felt like weed - until it fell off then moved against the tide and grabbed on again! Unfortunatly didn't manage to hook it , wasn't my day! Does anyone know if they will gladly take a squid jig? Or is that too prawny and they want fish? Cheers Rob

Gents - I am afraid you have missed the boat (well plane). Week before last I had an actuator deliverd to Alun whilst on hols in the US, I hope to get my mits on it in the next couple of days. Mine, I think packed up as they aren't designed for saltwater use (the SX series - plastic composite ones). There is a bellow covering the strut and it seals top and bottom with plastic ties. I think Saltwater has got in and slightly corroded the piston when extended - and so when compressed the corroded bit has damaged the seal. If I was unable to get the unit via AJ I was going to get the stainless steel version from here and make it fit - they do a version with a valve so it can be re-gassed \ pressure changed: http://www.gasspringstruts.co.uk/gas-springs.aspx Quite easy to work out the pound to N pressure required - and just get the ends that look most likely to fit. Tob

I would be keen to know what the weight with trailer was if not using a 4x4. It is all well and good towing 2000kg with a car (such as caraven) until you need to pull it up a slimey \ wet slipway or manouver it over soft-ish ground. Or a nice bit of ice when off cod fishing! (Winter before last Mudeford slip was a sheet of ice, after a club member had lauched 20mins before me, the water had frozen and launching had to be by hand, I would not have fancied my chances of retreiving without a 4x4 and a rope, luckily it had defrosted by the time we came in). recommended towing weights is 85% of towing vehicle weight - doesn't have to be so but most cars will not (legally) tow much more than their own weight. You need a low ratio gearbox to get that figure up much more. p.s. lovely looking boat - go for the open one if it were me!!! HTH Rob