Adam F

I think I'll probably answer my own question here, but anyway... I have a 13.25" x 17 Alloy prop on the Honda at present. I want to upgrade to a S/S and Warrior tell me that the Alloy prop revs to about 5600/5800. The engine is rated to 6000 WOT. Warrior recommend an upgrade to the 16" pitch S/S prop, but these are like like rocking horse poo and only available from Honda at over

Already done Martin. Most helpful chaps they were too, and they offered a discount... ....but at over

So long as youve got a good job, what the hell is wrong with that!!! ...now I know why you are always late when we go early morning fishing!

Not too sure yet Paul. The engine is going into Poole Marine Services on Weds for a once over and the prop is over at Prop Revs having a missing chunk replaired, so not this w/e. However if I can find a S/S prop this week I'll take her out. Why, do you fancy joining me?

They have, but not for the older models, only for the 2007, 4000 series units. I have ordered the 320c FF, but they have upgraded me FOC to the 340c - I would actually prefer the older model! I may look into getting the charts from the US - is the G2 better than the old ones? Find it a little strange that the US sells UK charts though!

Dom, 29th April is the trail-away to Burnham, we have offered them either the first specimen hunt or the May bream comp and are waiting to hear back to see what suits best. I'll be posting more details in due course. Adam

What are you replacing it with then?

Phil - B&O's is where I found her, along with the other one which fell through. IMO its the best place to find a boat. www.findafishingboat.co.uk can also be good. If you are looking for a 175, their is a 2004 boat on their at the moment with a 90 Honda for

I ended up with the 2010c - at a price that not even the US could beat - a little bit of an error on the dealers part, but fair play to him - he honoured the deal. Should be here in a few days so will let you know what I think!

Cruising Endurance - I guess, is how far / long you can cruise on an average sea with a full tank of fuel. As a rough example on BW it would have been 20 knots cruising speed, using approx 1l per mile of fuel. Therefore my fuel capacity was 50l, which equates to 50 miles (using 1 knot = 1 mile which of course needs altering slightly). This would have taken 2 hours 30 mins which would be my cruising endurance in time. Hope this helps?

It doesnt matter Harry. It depends on the setup of your boat, as you are correct in that you need to balance out the weight, so consdier where your batteries etc are. Another tip is to make sure you back the bolts with a piece of marine ply or similar, just to spread the load. FYIW, mine was mounted high up on the portside, it worked fine here. Although I have seen many 165's with them mounted low in the engine well alongside the main engine. As for 2/4 strokes, if you only want it as as back-up go for a 2 stroke, simple to maintain and cheaper. If you are going to use it (trolling etc) then a 4 stroke is the way to go. 2nd hand 2 strokes are also easier to find.

Yep, I expect Garmin to be my choice, just trying to find the gear I want at the right prices at the moment. The 2007 Garmin kit (not available in the UK till Spring) has satalite photo basemaps, which are outstading in quality - I'm just a little unsure of how well they will supported in the UK at the moment by Garmin.. http://www.garmin.com/marine2007/index.html Its a good time of year to get her though, I've got a good few weeks of fitting out etc to do before the plaice arrive What have you decided to fit on GWII?

Hmmm, I was looking at the Garmin 2210c, but have since found this was developed for the US market only, the Worldwide equivelent is the 2010 or the 2110, both more expensive!

Q: If I purchase a Garmin Plotter unit from the US, it will come with a US basemap. Does this mean it cant be used in the UK? If I pop in a UK Bluechart will the unit take the map from their and therefore work? Ta Adam

FOR SALE: Lowrance X-71 Fishfinder. Immaculate condition in box. Details here: http://www.marineelectronicshoppe.com/Lowrance/X71.htm Looking for

FOR SALE: Aux engine bracket, good condition. Will take up to 15hp. These retail at about 90 quid: http://www.mailspeedmarine.com/ProductDeta...e1-46dfbb6904f6 I'm looking for

3000 posts! Wow, Assuming it takes me a minute to write a post on average (more like 2/3 I'd have thought) that is 50 hours or just over 2 full days! ...Blimey, I must get out more...

Dont they all?!?!.... The 60hp Mariner EFI 4 Stk is a little underpowered on th 165, however the 60hp Suzi is a different beast (according to reports)... 4 stokes do use most of their fuel in the last 1/4 of the rev range, so yes running larger will be better. The figures quoted above are very similar to what BW used to run at though, its all see saws and swings. Will be interesting to see what the big BF115 runs at!

Thanks Reg, Gordon and I have discussed it in depth this morning and will tow up in one go (sharing the journey) and meet you at the accomidation. Thanks for the directions. Looking forward to it already!

Its been a good day, not only do we have a new boat, but we sold our house on the way home with 'Out of the Blue' SO! Having finally found a new boat, we're on the look out for a new house now - just hoping that it's not as hard as buying a boat. Mike - Yep, plenty of bling on the way - 10.5" colour plotter, 6" FF and new VHF. Plenty of SS goddies waiting to go on as well!

Awaiting the tow back to Bmth...

Well, at the forth time of trying, Ive actually managed to replace BW. Understandably I have been a little hush hush on this last one after the previous three failed attempts. Anyway! ' Out of the Blue ' is now safetly back home and all mine!! I've postponed the idea of a cross channel moored boat until next year, so Plan B was a Warrior 175. She's a minter, never been fished from, lived in the med most of her life and has a strapping BF115 Honda bolted to the back. She needs kitting out so plenty of shineys and bling is on its way! Just need some good weather to get her out..

Al, Check this out for a top tip, whilst it wont repair the coating it will sort it out. http://www.worldseafishing.com/forums/showthread.php?t=53847 Adam

Steve, I'm really surprised at your bad luck. I used my 165 as hard as anyone (as you know) and never had a problem, I havent even heard of anyone else having these issues.... Best of luck with the replacement. Adam

Well, we are now down to just 2, Gordon and I. Last chance, if anyone fancies - i'll be letting Reg have numbers at the weekend.